Jaypro-sports FBLC-30 Manuel d'utilisateur

3/23/2011 www.jaypro.com Page 1 of 12 LINEMEN CHUTE INSTALLATION INSTRUCTIONS MODELS FBLC‐30 & FBLC‐20

3/23/2011 www.jaypro.com Page 10 of 12 FIGURE-13 FIGURE-14 FIGURE-15

3/23/2011 www.jaypro.com Page 11 of 12 10. Stretcher to Load Bar The stretcher frame is attached to the Load Bar with chain and quick links as sh

3/23/2011 www.jaypro.com Page 12 of 12 12. Safety Padding  After completing the installation of bungee balls all around the stretcher frame inst

3/23/2011 www.jaypro.com Page 2 of 12 1. Introduction This user guide describes how to assemble Models FBLC‐30 and FBLC‐20 Linemen Chutes. The us

3/23/2011 www.jaypro.com Page 3 of 12 FIGURE-1 6. End Frame Assembly Assemble both end frames. With the end frame lying on the ground make the a

ITEM QTY DESCRIPTION 1 2 2 in x 8 in END FRAME 2 2 LEFT LEG MNTG PLATE 3 2 RIGHT LEG MNTG PLATE 4 4 LEG MOUNTING PLATE 5 4 OUTER LEG 6 4 INNE

3/23/2011 www.jaypro.com Page 5 of 12 7. Frame Assembly Assemble the frame as shown here in steps 7 through 7c, attach the hardware loosely and ma

3/23/2011 www.jaypro.com Page 6 of 12 7a. Assemble Load Bar With the load bars approximately level with each other and sitting on top of the scaff

3/23/2011 www.jaypro.com Page 7 of 12 7c. Brace Assembly Assemble all four braces to the frame and load bar. (SEE FIGURES 9 & 10) Retracting t

3/23/2011 www.jaypro.com Page 8 of 12 9. Stretcher Frame Assembly Assemble the stretcher frame (FIGURES 12a OR 12b) on the ground. See Figures 13

3/23/2011 www.jaypro.com Page 9 of 12 MODEL FBLC-20 STRETCHER FIGURE-12b ITEM QTY DESRIPTION 1 2 U‐SHAPED SPREADER TUBE 2 2 SWAGED BOTH ENDS P